Is there any way to check if the shock absorber is working properly?
Judging the quality of shock absorbers based on the performance of the vehicle
1. After driving the car on a road with poor road conditions for 10km, stop and touch the outer shell of the shock absorber with your hand. If it is not hot enough, it means that there is no resistance inside the shock absorber and it is not working.
2. Press down firmly on the bumper and then release it. If the car jumps within 2-3 times, it indicates that the shock absorber is working properly.
When the car is driving slowly and emergency braking occurs, if the car vibrates violently, it indicates that there is a problem with the shock absorber.
4. Comparing the surface of the tire, if there is no obvious eccentric wear phenomenon on the surface (such as unilateral wear, middle block gap wear, etc.), it indicates that the shock absorber is in good condition.
5. Measure the suspension height to see if the height difference between the left and right exceeds 1cm. If it does, it may be due to the failure of the shock absorber.
